CSW-H85K2 / Serial WLAN Device Server

Regular price 139.15 EUR
Regular price Sale price 139.15 EUR
VAT included
SKU: 906246

Order 10 items and receive 5% off!

Regular price 139.15 EUR
Regular price Sale price 139.15 EUR

CSW-H85K2 – Serial WLAN Device Server

CSW-H85K2 converts legacy serial devices (RS232/RS422/RS485) into TCP/IP data over Wi-Fi (IEEE 802.11 b/g), enabling remote monitoring and control when wired networking is difficult. It includes Wireless RSSI for easier deployment, Soft AP for setup without an access point, and WPA-Enterprise for high-security environments.

Serial Interface
RS232 / RS422 / RS485
Wi-Fi Standard
IEEE 802.11 b/g
Wireless RSSI
Signal strength visibility
Security + IP Stack
WPA-Enterprise, IPv4/IPv6
CSW-H85K2

Key features

  • Serial-to-Wi-Fi TCP/IP conversion for RS232/RS422/RS485 devices (wireless monitoring and control).
  • Wireless RSSI mode helps during installation to validate signal quality and placement.
  • Soft AP allows configuration and connection from mobile devices without a Wi-Fi AP.
  • IPv4/IPv6 dual stack supports long-term networking and transitions to IPv6.
  • WPA-Enterprise security supports enterprise authentication requirements.

Soft AP + RSSI for fast commissioning

CSW-H85K2 is designed for environments where pulling cable is difficult. Soft AP provides a direct setup path from a phone/laptop, while Wireless RSSI helps confirm that the installed location has adequate Wi-Fi signal for stable operation.

  • Configure IP/SSID/security through the web interface for repeatable rollout.
  • Works in typical WLAN topologies (Infrastructure and Ad-hoc) and supports Soft AP for setup.
WLAN modes
Tools

Communication modes, management & framing

Use standard serial-over-IP modes for remote connectivity, and rely on built-in monitoring tools for commissioning and support. Separator (packet framing) helps when serial traffic is message-based and needs clean packet boundaries.

  • Supports common tunneling modes (TCP Server, TCP Client, UDP) and AT Command mode for flexible setups.
  • Multiple monitoring options: debugging mode, ezManager, and TELNET status checks.
  • Virtual COM (ezVSP) for Windows helps legacy software communicate over Wi-Fi without code changes.
Wireless RSSI mode
Helps validate signal strength and improves placement decisions during installation.
Soft AP commissioning
Configure and connect directly from a phone/laptop when no access point is available.
Serial interface flexibility
Supports RS232/RS422/RS485 to fit a broad range of industrial serial devices.
WPA-Enterprise security
Enterprise authentication options help meet stricter wireless security policies.
Monitoring & tools
Use ezManager, TELNET, and diagnostics to monitor communication status and maintain uptime.
Separator (packet framing)
Improves transport of framed serial messages across TCP/UDP connections.

Serial Physical Interface

Serial Interface

RS-232 - RxD, TxD, RTS, CTS, GND
RS422 - Rx+, Rx-, Tx+, Tx-, GND with embedded 3.9K biasing resistors and TVS
RS-485 - TRX+, TRX-, GND with embedded 3.9K biasing resistors and TVS
±15KV ESD Protection

Serial Port Property

Baudrate

300bps ~ 230,400bps

Data Bits

5, 6, 7, 8 bits

Properties

None, Even, Odd, Mark, Space

Stop Bit

1, 2

Flow Control

RTS/CTS Hardware

Network Interface

Wireless LAN Interface

IEEE802.11b/g Wireless LAN
Supplied with a dipole 2dBi Antenna
SMA connector for external antennas

Software Functions

Wireless LAN Mode

Ad-Hoc, Infrastructure

Soft AP: WEP, Simple DHCP Server

Protocols

IPv4/IPv6 Dual Stack, ICMPv6/TCPv6/UDPv6
TCP, UDP, IP, ICMP, ARP, TELNET
DHCP, DNS, DDNS

TELNET COM Port Control Option (RFC 2217)

Security

WEP, WPA-PSK, WPA2-PSK
WPA-Enterprise: EAP-TLS, EAP-TTLS, PEAP
IP & MAC Filtering - Restrict Host or Network

Password for Configuring

Communication Mode

TCP Server (T2S)
TCP Client (COD)
TCP Server/Client with AT Command (ATC) - Patent

UDP Mode (U2S)

Additional Functions

Debug Function
Sending MAC address Option
Factory Reset
Wireless RSSI (Received Signal Strength Indication) Mode

Indicators (LEDs)

Power

Red

Status

Yellow, The current status

Wireless LAN Link

Green

Wireless LAN RxD

Yellow

Wireless LAN TxD

Green

Management

ezManager

Configuration and Monitoring through Network and Serial

TELNET

TELNET Login

AT Command

Configuring in ATC Mode - Patent

Supplementary Software

ezManager

Configuration Tool for Windows through Network and serial

ezVSP

Serial to Network Virtual Driver for Windows

ezTerm

Simple TCP/IP Communication Test Tool

Dimension

Size

88.5mm x 57.0mm x 23.0mm (Without an Antenna)

Operating Environments

Input Voltage

DC 5±0.5V

Current Consumption

260mA Typical

Operating Temperature

-10℃ ~ +70℃

Storage Temperature

-40℃ ~ +85℃

Certificate

KC

Certificate(KN 32, KN 35, KN 301 489-1, KN 301-489-17)